Chemistries ONLINE SHOP: +66 2 0263529 Ex.5293

ULTRATURB Seawater sc with 20m Cable

สินค้าที่ยกเลิกการผลิตแล้ว

ULTRATURB Seawater sc with 20m Cable
สินค้า: LPV415.99.52002

สินค้าที่ยกเลิกการผลิตแล้ว

Large measuring range: 0.0001 - 1,000 NTU

The Hach Ultraturb plus sc Sensor measures turbidity from 0 to 1000 FNU (NTU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.

Self-cleaning Sample Chamber Option

The Ultraturb sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.

Suitable for seawater, brackish water, raw water and other applications

The new Ultraturb seawater sc is resistant to salt concentrations up to 65 g/L.

Ratio Methodology Detects Sample Chamber Fouling

The Ultraturb sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system.

The Ultraturb sensor can be used with Hach's SC200 and SC1000 Digital Controllers. The SC200 controller accepts up to two sensors. The SC1000 accepts up to eight sensors. Multiple controllers can be networked to accommodate many more sensors and parameters, reducing the cost per measuring point. Just plug in any Hach "plug and play" digital sensor and its ready to use without software configuration. Plug and play connectivity means there's no complicated wiring or set up. Network the Ultraturb sensor with any of Hach's digital sensors for measuring dissolved oxygen, ORP, conductivity, and many other parameters.

มีอะไรในกล่อง

Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual

ข้อมูลจำเพาะ

Automatic Wiper: ใช่
การตรวจสอบความถูกต้อง: Stablcal or dry standard CVM module
การทำความสะอาดเซนเซอร์: Wiper, automatic
ขนาด (ส x ก x ล): 240 mm x 250 mm x 110 mm
ความแม่นยำ: ± 0.008 FNU ±1% of reading whatever is greater
(0 - 10 FNU)
ความยาวสายเคเบิล: 20 m
ความสามารถในการทวนซ้ำ: ± 0.003 FNU or ± 0.5% of reading (whichever is greater) from 0 - 2 FNU
จอแสดงผล: Display provided through connection with Hach sc Controller
ช่วงการวัด: 0.0001 - 1000 FNU freely programmable (0.0001 - 250 EBC = 2500 ppm SiO2)
ช่วงความดัน: 6 bar at 20 °C (87 psi at 68 °F)
ช่วงอุณหภูมิในการทำงาน: -10 - 40 °C (Display Unit)
ทางเข้า: 13 mm ID Tubing or fixed connection (PVC system component pipework)
ทางออก: 13 mm ID Tubing or fixed connection (PVC system component pipework)
น้ำหนัก: Approx. 1.5 kg
มีอะไรในกล่อง: Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual
รุ่น: Ultraturb seawater sc
วัสดุ: Housing: ASA; Wiper Blade: Silicon; Wiper Shaft: Stainless steel 1.4571
วิธีการปรับเทียบ: Stablcal or dry standard CVM module
วิธีการวัด: 90° infrared pulse scattered light technique in accordance with DIN EN ISO 7027
เวลาตอบสนอง: 1 - 60 s (programmable)
อัตราการไหลของตัวอย่าง: 0.2 to 1 L/min
อุณหภูมิตัวอย่าง: Max. 50°C (122°F)