Chemistries ONLINE SHOP: +66 2 0263529 Ex.5293

9185sc Ozone Analyzer with sc100 controller and RS-485

สินค้าที่ยกเลิกการผลิตแล้ว

9185sc Ozone Analyzer with sc100 controller and RS-485
สินค้า: 6043301

สินค้าที่ยกเลิกการผลิตแล้ว

Few Interferences from Oxidants or pH over a Wide Measurement Range

Bromine, chloramines, chlorine, chlorine dioxide, hydrogen peroxide, and pH do not interfere with ozone measurements using the Hach 9185sc Amperometric Ozone Sensor, which can measure from 0 to 2 mg/L ozone.

Ideal for Low-Conductivity Samples

The 9185sc ozone system has a low minimum detection limit of 0.005 mg/L ozone. Because the amperometric cell is separated from the sample by the membrane and is immerged into an electrolytic medium, the 9185sc ozone sensor is suitable for use in water with low conductivity.

Reliable Amperometric Measurements

The sensor used in the 9185sc system is a two-electrode amperometric sensor (gold cathode and silver anode) with a membrane selective to ozone. Membranes are pre-mounted on retaining caps to simplify and reduce maintenance time.

Flexible Options

Options available for the 9185sc ozone system include: Acidification Unit, which can be used intermittently or continuously for cleaning and is fully programmable, and Intermittent Flow Unit, which is fully programmable and saves resources while limiting excess flow to drain.

Easy Setup and Maintenance

The all-inclusive 9185sc ozone system comes pre-assembled on a panel. The membrane system of the sensor means there are no chemicals used for measurement. Maintenance is minimal and two years of typical maintenance items are included with the system.

มีอะไรในกล่อง

9185sc Ozone Sensor, 9185sc User Manual, sc100 with Modbus, sc100 User Manual, sc100 Mounting Panel

ข้อมูลจำเพาะ

การชดเชยอุณหภูมิ: Automatic over sample temperature range
  Automatic over sample temperature range
การเชื่อมต่อ สายตัวอย่าง: 1/4-in. O.D.
การเชื่อมต่อ สายระบาย: 1/2-in. I.D. (supplied)
การติดยึด: Flat, vertical surface (panel, stand, etc.)
การปรับเทียบ: Comparison of lab method with process sample
การรบกวน: No interference from bromine, chloramines, chlorine, chlorine dioxide, or hydrogen peroxide
การไหล: 14 L/h (200 - 250 mL/min) au-regulated by flow thru cell
ขอบเขตการตรวจจับขั้นต่ำ (LOD): 5 ppb 0.005 mg/L or 0.005 mg/L O3
ความชื้นสัมพัทธ์: 1 - 90 % non-condensing
ความเบี่ยงเบนมาตรฐาน: 1.0 %
ความแม่นยำ: 3 % or ± 10 ppb O3, whichever is greater
ช่วง: 0.005 - 2 ppm (0.005 mg/L - 2 mg/L)
ช่วงการวัด: 0 - 2 ppm (mg/L) ozone (O3)
ช่วงความดัน: 0.1 to 2 bar in flow cell
ช่วงอุณหภูมิในการทำงาน: 0 - 45 °C
น้ำหนัก: 6.5 kg (14.3 lbs)
น้ำหนักเรือ (ปอนด์): 6.5 kg(14.3 lbs.)
ใบรับรอง: UL, CSA (certified by ETL), CE
มีอะไรในกล่อง: 9185sc Ozone Sensor, 9185sc User Manual, sc100 with Modbus, sc100 User Manual, sc100 Mounting Panel
รอบเวลา: 90 % in T<90sec
ระยะห่างของการบำรุงรักษา: Measurement Cell: 6 months for membrane and electrolyte, typical
ระยะห่างของการปรับเทียบแต่ละครั้ง: 2 months
วัสดุ: Electrodes: gold cathode/silver anode
วิธีการปรับเทียบ: Electrically or with ozone-free water
เวลาตอบสนอง: 90 % in less than 90 seconds
หลักการวัด: Amperometric/Membrane (electrode,
membrane, electrolyte)
อินพุตตัวอย่าง: 0.25 " outer diameter
อุณหภูมิตัวอย่าง: 2 - 45°C (35.6-113 F)
เอาต์พุตตัวอย่าง: 0.5 " inner diameter