Chemistries ONLINE SHOP: +6693 769 9254

1.0 Cell Constant, Compression fitting style, Contacting Conductivity Digital Sensor

1.0 Cell Constant, Compression fitting style, Contacting Conductivity Digital Sensor
สินค้า: D3422A2
Unit Price ติดต่อ Hach
Ships within 6-8 weeks

High Performance Design

These enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1ºC accuracy.

Resistivity and Conductivity Measurement Capability

These enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 MΩ) up to 200,000 µS/cm. Hach’s sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements.

Versatile Mounting Styles

Compression fitting sensors—Feature titanium electrodes and a compression fitting for universal installation with up to 4 inches (102 mm) insertion depth. The 1/2-inch or 3/4-inch male NPT compression fittings are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor from the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 7 inches (178 mm).

Full Featured “Plug and Play” with Digital SC Controller

There are no complicated wiring or set up procedures with any Hach SC controller. Just plug in any combination of Hach digital sensors and it's ready to use—it’s “plug and play.”

มีอะไรในกล่อง

Includes: sensor with cable and manual

ข้อมูลจำเพาะ

Digital Gateway: Integral Digital Gateway
Installation Kit: 1/2" NPT
Installation style: การอัด
การชดเชยอุณหภูมิ: Temperature Compensator: Pt 1000 RTD
  Temperature Compensator: Pt 1000 RTD
การรับประกัน: 12 เดือน
การวัดอุณหภูมิ: -20 - 200 °C (-4 - 392°F)
การไหล: 0 - 3 m/s (0–10 ft./s), maximum, fully immersed
ข้อกำหนดการติดตั้ง: 316 Stainless Steel
ความแม่นยำ: ± 2 % of reading above 200 µS/cm
ความยาวสายเคเบิล: 6 m
  7 m (23 ft.)
ความไว: ± .05 % of reading
ความสามารถในการทวนซ้ำ: ± 0.5 of reading
ค่าคงที่ของเซลล์ k: 0.05 cm-1
ช่วงการวัด: 0 - 100 µS/cm
ช่วงความดัน: 0 - 300 psi (20.7 BAR)
ช่วงอุณหภูมิในการทำงาน: -20 - 200 °C
ประเภทเซนเซอร์: Digital
มีอะไรในกล่อง: Includes: sensor with cable and manual
ระยะห่างของการส่งข้อมูล: 100 m (328 ft.), maximum
ระยะห่างของการส่งข้อมูล 2: 1000 m (3280 ft.), maximum when used with a termination box
วัสดุอิเล็คโทรด: Titanium
เวลาตอบสนอง: 90 % of reading within 30 seconds of step change
สายเคเบิลเซนเซอร์: Digital: PUR (polyethylene) 5-conductor, shielded, rated to 150°C (302°F)