Automatic cleaning:
Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
การตรวจสอบความถูกต้อง:
Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
การต่อลงดิน:
Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
การปรับเทียบ:
Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
การรบกวน:
Positive interferences may be caused by arsenate (AsO₄³⁻) and, under heated conditions, by silica or silicate (SiO₄-)
Reducing substances such as sulfide (S²⁻), thiosulfate (S₂O₃²⁻), thiocyanate (SCN⁻), and excess molybdate (MoO₄²⁻) may interfere at high concentrations. The following ions do not cause interference at concentrations up to 1,000 mg/L: aluminium, ferric iron, magnesium, calcium, barium, strontium, lithium, sodium, potassium, ammonium, cadmium(II), manganese(II), lead(II), mercury(I), mercury(II), tin(II), copper, nickel, silver(I), uranium(IV), zirconium(IV), arsenite, bromide, carbonate, perchlorate, cyanide, iodate, nitrate, nitrite, sulfate, sulfite, pyrophosphate, tetraborate, selenate, benzoate, citrate, oxalate, lactate, tartrate, formate, and salicylate.
Large quantities of color and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere.
การรับประกัน:
12 เดือน
ขนาด (ส x ก x ล):
688 mm x 460 mm x 340 mm
ข้อกำหนดของสารรีเอเจนต์:
Keep between 10 - 30 °C
ขอบเขตการตรวจจับขั้นต่ำ (LOD):
No Dilution
0.02 - 1 mg/L PO₄-P: 0.02 mg/L
0.05 - 2.5 mg/L PO₄-P: 0.05 mg/L
0.05 - 5 mg/L PO₄-P: 0.05 mg/L
0.1 - 10 mg/L PO₄-P: 0.1 mg/L
Internal Dilution
0.5 - 50 mg/L PO₄-P: 0.5 mg/L
1 - 100 mg/L PO₄-P: 1 mg/L
2.5 - 250 mg/L PO₄-P: 2.5 mg/L
5 - 500 mg/L PO₄-P: 5 mg/L
7.5 - 750 mg/L PO₄-P: 7.5 mg/L
10 - 1000 mg/L PO₄-P: 10 mg/L
ความดันตัวอย่าง:
By external overflow vessel (open to atmospheric pressure)
ความแม่นยำ:
Better than 2% full scale range for standard test solutions
คุณภาพตัวอย่าง:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
เครื่องตรวจวัดอากาศ:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
จำนวนสตรีมตัวอย่าง:
Standard: 1
Optional accessory for 2, 4, or 8 sample streams
ช่วงการวัด:
No Dilution
0.02 - 1 mg/L PO₄-P
0.05 - 2.5 mg/L PO₄-P
0.05 - 5 mg/L PO₄-P
0.1 - 10 mg/L PO₄-P
Internal Dilution
0.5 - 50 mg/L PO₄-P
1 - 100 mg/L PO₄-P
2.5 - 250 mg/L PO₄-P
5 - 500 mg/L PO₄-P
7.5 - 750 mg/L PO₄-P
10 - 1000 mg/L PO₄-P
ท่อระบาย:
Atmospheric pressure, vented, min. Ø 32 mm
น้ำปราศจากแร่ธาตุ:
Internal dilution option: Rinse water & Dilution water
น้ำหนัก:
Max. 35 kg
ใบรับรอง:
CE, ETL certified to UL and CSA safety standards, UKCA
พลังงาน:
100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
พารามิเตอร์:
Phosphate (vanadate yellow)
มีอะไรในกล่อง:
EZ1031sc Phosphate Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets and 1 x empty 2.5L Reagent Container with Fittings (for Colour Solution)
รอบเวลา:
No Dilution
Default: 10 min.
Continuous: 9 min.
Internal Dilution
Default: 15 min.
Continuous: 12 min.
ระดับการปกป้อง:
IP44
รีเลย์:
5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
วัสดุ:
Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
วิธีการวัด:
Colorimetric measurement vanadates yellow method compliant with APHA 4500-P (C)
อัตราการไหลของตัวอย่าง:
100 - 300 mL/min
อุณหภูมิโดยรอบ:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
อุณหภูมิตัวอย่าง:
5 - 30 °C
เอาต์พุต:
Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
เอาต์พุตดิจิตอล:
Profibus DP or Modbus RTU
เอาต์พุตแบบอนาล็อก:
Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8