Automatic cleaning:
Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
IP Rating:
IP44
การตรวจสอบความถูกต้อง:
Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
การต่อลงดิน:
Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
การปรับเทียบ:
Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
การรบกวน:
Aluminium (III) (Al3+) > 5 mg/L, cadmium (II) (Cd2+) > 1 mg/L, chromate (VI) (CrO42–) > 50 mg/L, chromium (III) (Cr3+) > 10 mg/L, cobalt (II) (Co2+) > 30 mg/L, copper (II) (Cu2+) > 30 mg/L, iron (II) (Fe2+) > 9 mg/L, iron (III) (Fe3+) > 7 mg/L, manganese (II) (Mn2+) > 5 mg/L, nickel (II) (Ni2+) > 5 mg/L, organic matter and extreme sample pH. Large quantities of color and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere.
การรับประกัน:
12 เดือน
ขนาด (ส x ก x ล):
688 mm x 460 mm x 340 mm
ข้อกำหนดของสารรีเอเจนต์:
Keep between 10 - 30 °C
ขอบเขตการตรวจจับขั้นต่ำ (LOD):
No Dilution
0.01 - 0.1 mg/L Zn(T): 0.01 mg/L
0.03 - 0.25 mg/L Zn(T): 0.03 mg/L
0.03 - 0.5 mg/L Zn(T): 0.03 mg/L
0.05 - 1 mg/L Zn(T): 0.05 mg/L
Internal Dilution
0.25 - 5 mg/L Zn(T): 0.25 mg/L
0.5 -10 mg/L Zn(T): 0.5 mg/L
1.25 - 25 mg/L Zn(T): 1.25 mg/L
ความดันตัวอย่าง:
By external overflow vessel (open to atmospheric pressure)
ความแม่นยำ:
Better than 2% full scale range for standard test solutions
คุณภาพตัวอย่าง:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
เครื่องตรวจวัดอากาศ:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
จำนวนสตรีมตัวอย่าง:
Standard: 1
Optional accessory for 2, 4, or 8 sample streams
ช่วงการวัด:
No Dilution
0.01 - 0.1 mg/L Zn(T)
0.03 - 0.25 mg/L Zn(T)
0.03 - 0.5 mg/L Zn(T)
0.05 - 1 mg/L Zn(T)
Internal Dilution
0.25 - 5 mg/L Zn(T)
0.5 -10 mg/L Zn(T)
1.25 - 25 mg/L Zn(T)
ท่อระบาย:
Atmospheric pressure, vented, min. Ø 32 mm
น้ำปราศจากแร่ธาตุ:
Internal dilution option: Rinse water & Dilution water
น้ำหนัก:
Max. 35 kg
ใบรับรอง:
CE, ETL certified to UL and CSA safety standards, UKCA
พลังงาน:
230 VAC, 50/60 Hz
120 VAC, 50/60 Hz
Max. power consumption: 240 VA
พารามิเตอร์:
Zinc, Total
มีอะไรในกล่อง:
EZ2740sc Iron Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 2 x empty 2.5 L Reagent Containers with Fittings (for Reductor & Buffer Solution) and 1 x empty 2.5 L Glass Reagent Container (for Colour Solution)
รอบเวลา:
No Dilution
Default: 30 minutes
Continuous: 29 minutes
Internal Dilution
Default: 32 min.
Continous: 32 min.
ระดับการปกป้อง:
IP44
รีเลย์:
5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
รุ่น:
EZ2740sc
วัสดุ:
Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
วิธีการวัด:
Zincon colorimetric method
อัตราการไหลของตัวอย่าง:
100 - 300 mL/min
อุณหภูมิโดยรอบ:
10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
อุณหภูมิตัวอย่าง:
10 - 30 °C
เอาต์พุต:
Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
เอาต์พุตดิจิตอล:
Profibus DP or Modbus RTU
เอาต์พุตแบบอนาล็อก:
Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8