Chemistries ONLINE SHOP: +6693 769 9254

EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA

EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, 1 stream, 4x mA
สินค้า: EZ3005.9700140T
Unit Price ติดต่อ Hach

Reliable, Stable Measurements

Avoid downtime from unreliable ISE data caused by temperature fluctuations. The EZ3005sc stabilises both sample and electrode using a temperature controlled flow cell, eliminating measurement errors and delivering precise, repeatable chloride results operators can trust.

Lower Maintenance Effort

Minimise downtime and service costs with the EZ3005sc. Automated 2 point calibration, reagent alerts, a rugged ISE electrode, and minimal moving parts extend maintenance intervals; so operators spend less time servicing instruments and more time on plant operations.

Reduced Operating Cost

The EZ3005sc helps optimise operating costs by reducing chemical consumption and service visits. Multi stream capability monitors up to eight sample lines, lowering cost per sampling point and extending equipment life.

Designed for easy integration into existing control systems

With a wide range of analogue and digital outputs, this analyser aligns with plant specific requirements, ensuring compatibility with existing infrastructure and immediate access to real time measurement data.

มีอะไรในกล่อง

EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode and Chloride Electrode, combined, and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)

ข้อมูลจำเพาะ

Automatic cleaning: Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
การตรวจสอบความถูกต้อง: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
การต่อลงดิน: Earth connection Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
การปรับเทียบ: Automatic; 2-point; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
การรบกวน: Bromide [(Br)-], sulphide [(S)²-], iodide [(I)-], cyanide [(CN)-] ions may interfere. Mercury [(Hg)+] must be absent. Ammonia [NH₃] and thiosulphate [(S₂O₃)²-] may interfere. Fats, oil, proteins, surfactants and tar.
การรับประกัน: 12 เดือน
ขนาด (ส x ก x ล): 688 mm x 460 mm x 340 mm
ข้อกำหนดของสารรีเอเจนต์: Keep between 10 - 30 °C (50 - 86 °F)
ขอบเขตการตรวจจับขั้นต่ำ (LOD): 2 - 100 mg/L Cl-: 2 mg/L
5 - 250 mg/L Cl-: 5 mg/L
10 - 500 mg/L Cl-: 10 mg/L
20 - 1000 mg/L Cl-: : 20 mg/L
ความดันตัวอย่าง: By external overflow vessel (open to atmospheric pressure)
ความแม่นยำ: Better than 2% full scale range for standard test solutions
คุณภาพตัวอย่าง: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
เครื่องตรวจวัดอากาศ: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
จำนวนสตรีมตัวอย่าง: Standard: 1
Optional accessory for 2, 4, or 8 sample streams
ช่วงการวัด: 2 - 100 mg/L Cl-
5 - 250 mg/L Cl-
10 - 500 mg/L Cl-
20 - 1000 mg/L Cl-
ท่อระบาย: Atmospheric pressure, vented, min. Ø 32 mm
น้ำปราศจากแร่ธาตุ: Does not apply
น้ำหนัก: Max. 35 kg (77 lb)
ใบรับรอง: CE, ETL certified to UL and CSA safety standards, UKCA
พลังงาน: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
พารามิเตอร์: Chloride
มีอะไรในกล่อง: EZ3005sc Chloride Ion-Selective Electrode (ISE) Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Electrode and Chloride Electrode, combined, and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)
รอบเวลา: Default: 5 minutes
Continuous: 5 minutes
ระดับการปกป้อง: IP44
วัสดุ: Hinged part: Thermoform ABS, Door: PMMA
Wall section: Galvanised steel, powder coated
วิธีการวัด: Discontinuous, direct measurement by combined Ion-Selective Electrode
  Ion-Selective Electrode
อัตราการไหลของตัวอย่าง: 100 - 300 mL/min
อุณหภูมิโดยรอบ: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
อุณหภูมิตัวอย่าง: 10 - 30 °C (50 - 86 °F)
เอาต์พุตดิจิตอล: Relays: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)

Ethernet Connections: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP

RS485 communication: Profibus DP or Modbus RTU
เอาต์พุตแบบอนาล็อก: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard 4, optional: 8