การตรวจสอบความถูกต้อง:
Automatic; frequency freely programmable
การต่อลงดิน:
Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
การปรับเทียบ:
Automatic, 2-point; frequency freely programmable
การรบกวน:
Chloride > 1 g/L, inorganic reducing agents such as nitrites, sulphides and iron(II) will increase the result, aromatic hydrocarbons and pyridine are not oxidized to any appreciable extent. Some very volatile organic substances may escape the oxidation by evaporation. Straight chain aliphatic compounds are effectively oxidised by the silver sulphate/sulphuric acid solution. Fats, oil, proteins, surfactants and tar.
การรับประกัน:
12 เดือน
ขนาด (ส x ก x ล):
690 mm x 465 mm x 330 mm
ข้อกำหนดของสารรีเอเจนต์:
Keep between 10 - 30 °C
ขอบเขตการตรวจจับขั้นต่ำ (LOD):
≤ 1 mg/L
ความดันตัวอย่าง:
By external overflow vessel
ความแม่นยำ:
Better than 5% full scale range for standard test solutions
คุณภาพตัวอย่าง:
Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
เครื่องตรวจวัดอากาศ:
Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air
จำนวนสตรีมตัวอย่าง:
1, 2, 4, or 8
ช่วง:
1 - 20 mg/L O₂
ช่วงการวัด:
1 - 20 mg/L O2
ท่อระบาย:
Atmospheric pressure, vented, min. Ø 32 mm
น้ำปราศจากแร่ธาตุ:
For rinsing
น้ำเย็น:
Flow rate approx. 5 L/h; temperature max. 30 °C; pressure max. 0.5 bar
น้ำหนัก:
25 kg
ใบรับรอง:
CE compliant / UL certified
พลังงาน:
230 VAC, 50/60 Hz
120 VAC, 50/60 Hz
Max. power consumption: 440 VA
พารามิเตอร์:
COD
มีอะไรในกล่อง:
EZ7050 COD Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x Combined Pt Electrode, Routine S7 Connection, 1 x empty 2.5L Reagent Container with Fittings (AgNO₃ Solution), 2 x empty 10L Reagent Containers with Fittings (Acid & Oxalate Solution) and 1 x empty 10L Reagent Dark Container with Fittings (KMNO₄ Solution)
รอบเวลา:
40 minutes, including oxidation time of 30 minutes.
Remark: standard method for Cr destruction requires 120 minutes.
ระดับการปกป้อง:
Analyser cabinet: IP55 / Panel PC: IP65
วัสดุ:
Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
วิธีการวัด:
Redox titration after oxidation by acid-potassium dichromate solution, conform with ISO 6060 method Or redox titration after oxidation by potassium permanganate solution, conform with ISO 8467 and JIS K0806 methods
สัญญาณเตือน:
1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts
อัตราการไหลของตัวอย่าง:
100 - 300 mL/min
อุณหภูมิโดยรอบ:
10 - 30 °C ±4 °C deviation at 5 - 95% relative humidity (non-condensing)
อุณหภูมิตัวอย่าง:
10 - 30 °C
เอาต์พุตดิจิตอล:
Optional: Modbus (TCP/IP, RS485)
เอาต์พุตแบบอนาล็อก:
Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)