Chemistries ONLINE SHOP: +66 2 0263529 Ex.5293

FP360sc Oil-in-Water Sensor, 5,000 ppb, Titanium Body, 10 m (32.8 ft) Cable, with Cleaning Unit

FP360sc Oil-in-Water Sensor, 5,000 ppb, Titanium Body, 10 m (32.8 ft) Cable, with Cleaning Unit
สินค้า: LXV441.99.22202
Unit Price ติดต่อ Hach
Ships within 6-8 weeks

Lowest Cost of Ownership

The FP 360 sc is specifically designed to detect traces of mineral oils in water while providing the necessary value and benefits for a positive return on investment.

The Right Technology for the Right Price

Due to its unique combination of submersible probe design and UV fluorescence sensing technology, the FP 360 sc delivers the best technology to detect oil in water and is priced below competitive UV fluorescent instruments.

Minimal Maintenance

The FP 360 sc has no tubes, pumps, or valves that can foul or require constant maintenance interventions. Maintenance is limited to occasional wiping of the sensor's measurement window, calibration once every two years, and Xenon lamp replacement every four years.

Reduced Laboratory Testing

While laboratory testing is the ultimate method of measuring oil in water, it is a long and complex process that requires special equipment and trained lab personnel. The FP 360 sc provides a cost-effective, continuous online monitoring solution to maintain process control and avoid oil contamination with minimal laboratory testing.

High Sensitivity and Selectivity

The FP 360 sc can detect and measure polycyclic aromatic hydrocarbons (PAHs) from 1.2 ppb to up to 5000 ppb (µg/L). This is approximately equivalent to a concentration of mineral oil between 0.1 to 150 ppm (mg/L). Furthermore, the FP 360 sc method of detection makes it impervious to interferences by turbid water or natural organic and biological matter that impact online light scattering, UV absorbance, and VIS fluorescence instruments.

มีอะไรในกล่อง

Oil-in-water probe, user manual

ข้อมูลจำเพาะ

Body Material: Titanium
การกระตุ้น: 254 nm
การทำความสะอาดเซนเซอร์: Yes
การปรับเทียบ: Factory calibrated with UV fluorescence standard or process calibration with results of a grab sample analysis.
การรับประกัน: 12 เดือน
ความยาวสายเคเบิล: 10 m (32.8 ft)
ความสามารถในการผลิตซ้ำ: 2.5 % of measured value at constant temperature
ความสูง: 12.05 in or 306 mm (DxH; without connector and suspension pin)
ค่า pH: ≥ 4
เครื่องตรวจจับ: UV photodiode with interference filter; Compensation of daylight and flashlamp intensity fluctuations
ช่วงการวัด: 0 - 5000 ppb (µg/L) (PAH) or 0.1 - 150 ppm (mg/L) (Oil)
ช่วงความดัน: Max. 30 bar 30 bar or 435 psia (measurement probe)
น้ำหนัก: Titanium: 1.8 kg
มีอะไรในกล่อง: Oil-in-water probe, user manual
ระดับการปกป้อง: IP68
วัสดุ: Housing: Titanium
วัสดุของตัวเครื่อง: Titanium
วิธีการวัด: UV fluorescence method for polycyclic aromatic hydrocarbons (PAH)
เวลาตอบสนอง T90: 10 s
สภาพการเก็บรักษา: -40 °C to 60 °C
แหล่งกำเนิดแสง: Miniature xenon flashlamp with interference filter
อุณหภูมิโดยรอบ: -5 - 45 °C (23 - 113 °F)
อุณหภูมิตัวอย่าง: 1 - 40°C (33.8 - 104°F)